Hammering a Hole in a Pressed Coin
To put a hole in a pressed coin, you don’t need an electric drill. Since the metal is already thin, a nail will drive right through it. This simple technique is easy to tackle for those who don’t have a machine shop or tool bench, as well. Just take your project to the back porch and turn your treasures into charms.
Drilling a Hole in a Pressed Coin
Drilling has its place in jewelry making, but in the case of making holes in pressed coins, enlisting the help of a drill just makes things more complicated. A hammer and nail work just as well and won’t create tiny metal chards that seek out human flesh. That said, should you choose to drill your holes instead of hammer them, you can follow the same methods as above (but use a drill instead of a hammer and nail). Be advised, however, that the act of drilling pennies will produce little metal corkscrew shavings that can fall on the floor and become lodged in your foot. These shavings will need to be diligently picked up and disposed of immediately after each drilling. Additionally, any tiny specks of lingering metal should be carefully cleaned up. And, always make sure you wear protective footwear and clothing when operating power tools, in general.
